1
Share:
Fire Rated 2 hour Intumescent Paint (For Steel)
Brand: Intumescent Paint
Category: Fire Rated Intumescent Paint (For Steel)
Specifications
Bomba Approval Certificate: Bomba Malaysia C1, C2 , C3
Fire Rating 1hour 2hour 3hour: Fire Rated : 1hr , 2hr , 3hr
Colour & Finishing: Colour : White & Slight Texture
Finishing Colour : RAL Standard colour & Customize colour available
Fire Rated Intumescent Coat [For Structural Steel]
Features
*Up to 2 hour fire rating.
*Durable and decorative finish.
*Fast drying time.
*Green Label Product.
*Bomba Certification [Malaysia Fire Department].
Details
Suitable for structural steel used as primer. [Apply directly to contour of primed I and H section columns, angles, channels and beams and hollow sections.
It can be sealed and protected with a decorative water based top coat.
Need advice from specialist applicator on the method of application.
Theoritical Coverage 1mm WFT = 0.7mm DFT [Dry film Thickness] = 1 litre per SqM , 1mm = 1000μm[microns]
Surface Burning Flame spread 5, smoke development 35 when tested to ASTM E84.
Durometer Hardness 80 shore D when tested to ASTM D2240.Initial SetApprox 6 hours at 20'C and 50% RH for 0.4mm WFT. Impact Resistance18 kg/m when tested to ASTM D2794. Fire ResistanceStructures protected with the coat have undergone fire resistance tests at approved independant laboratories to recognised standards throughout the world including:
- UK [BS476 : Part 21 : 1987]
- Canada and USA [ASTM E119 and ASTM E84]
- Australia [AS1530 : Part 4]
Assessed in accordance with ASFP 'Fire protection for structural steel in buildings' procedures.Storage- Indoors in dry conditions between 10'C and 38'C.
- Protect from frost, excessive heat [above 45'C] and strong radiant sunlight.Shelf LifeMaximum 10 months in original sealed containers.EnvironmentalDo not discharge into drains, watercourses or soil.
Product Specification
Main Raw Material Polyvinyl Acetate Resins and Filler
Usage Appliance Paint, Building Coating, Structural Steel
Application Method Air Spray and Roller Colour White Finish Flat Matt Finish
Max Thickness Per Coat Wet film thickness at 1.6mm [Spray] , 0.76mm using brush Practical Coverage Depend on surface texture, substrate, application method and technique
Theoritical Coverage Approx 18.79 SqM per container[1mm per litre] CureBy air drying
Abrasion Resistance 0.6505g per 1000 cycles when tested to ASTM D4060
Solid by Weight70% ± 2%
Density1.33 kg/litre
pH Value8.0 ± 0.2 at 25'C
Inquiry - Fire Rated 2 hour Intumescent Paint (For Steel)
